หน้าแรก | ติดต่อเรา | ข่าวสาร | เว็บบอร์ด | เกี่ยวกับเรา | วิธีการชำระเงิน | วิธีการสั่งซื้อ      
            ตั้งเป็นหน้าแรก    เครื่องคิดเลข    แจ้งการชำระเงิน         ไทย | English    
   หมวดหมู่สินค้า
แสดงสินค้าทั้งหมด (4191)
สินค้าขายดี (146)
สินค้ามาใหม่ (158)
Energy
AUTEL ROBOTIC
โปรโมชั่น
01 DJI INNOVATIONS
Gopro Camera
DJI Accessories
Tiger Motors
SEETEC
Feelworld/SeeTec monitor
feiyu-tech
FAT SHARK Goggle
Protect Case กระเป๋า
TAROT Multirotor
FPV Racing
Dragonlink system
Flex Innovations & AJ Aircraft
FMS Model
XFly Model
AV DIGITAL
FPV/UAV Systems
Multirotor & Parts
ManiaX Lipo
Multirotor & Parts
เครื่องบินไฟฟ้า-น้ำมัน Airplane
เฮลิคอปเตอร์ไฟฟ้า-น้ำมัน Helicopter
  - บอดี้สเกล
  - เฮลิคอปเตอร์ไฟฟ้า
  - เฮลิคอปเตอร์ไฟฟ้าชุดพร้อมบิน
  - เฮลิคอปเตอร์น้ำมัน
  - Multirotor Copter
  - Micro Helicopter & parts
มอเตอร์ไฟฟ้า Motors
สปีดคอนโทรล - Speed control
วิทยุรับ-ส่ง (Remote Controller)
เครื่องยนต์และอะไหล่ Engine & parts
เซอร์โวและชุดซ่อม
แบตเตอรี่-เครื่องชาร์จ
ไจโร,BEC & Governer
น้ำมัน-ไนโตร
เครื่องมือ-เครื่องวัด
โปรแกรมฝึกบิน
ใบพัดเครื่องบิน Propeler
เบลดเฮลิคอปเตอร์ Heli Blade
อุปกรณ์ประกอบ-อี่นๆ
อะไหล่-ชุดแต่ง Trex
อะไหล่ Copter X
อะไหล่-ชุดแต่ง เฮลิคอปเตอร์ไฟฟ้า
อะไหล่เฮลิคอปเตอร์น้ำมัน
รถยนต์-มอเตอร์ไซค์
สินค้าลดราคา
Speed Airboat
หนังสือ
เทป+กาว
สินค้าฝากขาย
Drone mini
   สมาชิก
อีเมล์ : 
รหัสผ่าน : 
 
 สมัครสมาชิก
 ลืมรหัสผ่าน
   เว็บเพื่อนบ้าน
RC Thai
Bangkokdomain


ร้านบูรพาทอย
ทางใหม่ซอฟ
DJI-Innovations
กระเป๋าสำหรับ DJI Avata มีหลายแบบ คลิกเลย


 
รหัสสินค้า : KX0160NPN
T-REX 600 Nitro 3G (Flybarless)
สถานะสินค้า : สินค้าพร้อมส่ง
ราคา ฿26,800.00   หยิบใส่ตะกร้า

มีจุดเด่นและรายละเอียดตามรายการดังนี้

 

Focus Shot1(High precision metal main rotor assembly) Focus Shot2(High precision bearing mixing arms) Focus Shot3(New elevator arm set, high rigidity metal main shaft bearing block)
Focus Shot4(Metal canopy mounting bolt) Focus Shot5(Metal stabilizer belt set) Focus Shot6(Tail rotor assembly with double bearings and heavy duty tail with thrust bearings)
Focus Shot7(600D Carbon fiber blade) Focus Shot8(RCE-G600 Governor) Focus Shot9(2 In 1 voltage regulator combo)
Focus Shot10(DS610 Digital servo) Focus Shot11(DS620 Digital servo) Focus Shot12(3G Programmable Flybarless System)
Package1:
Package2:

Instruction(3G Programmable Flybarless System) :

Specification(3G Programmable Flybarless System) :
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
●Suitable Voltage Range:DC 3~8.4V
●Current Comsumption:<80mA @ 4.8V>
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution: 12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Controlbox:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box:16g
Sensor:9g
Specification(T-REX 600NFL) :
●Length:1160mm
●Height:410mm
●Main blade length:600mm
●Main rotor diameter:1350mm
●Tail rotor diameter:240mm
●Engine pinion gear:20T
●Autorotation tail drive gear:180T
●Drive gear ratio:8.5:1:4.5(E:M:T)
●Flying weight:Approx. 3100g

Instruction(T-REX 600NFL) :

Accessories:
●Features
1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple andlight weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-15° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Highly efficient shaft driven tail design.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.10Kg.
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New tail boom supports.


Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
●T-REX 600N 3G kits set X1
●3G Programmable Flybarless System X1
●600D Carbon fiber blade X1
●DS610 Digital servo X3
●DS620 Digital servo X1
●2 In 1 voltage regulator combo X1
●RCE-G600 Governor X1
Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicoptersystem)
●Receiver(7-channel or more)
●Standard servo X1 ( for throttle)
●Align 50 engine X1
●50 Muffler X1
●Pitch gauge X1
●Super starter X1
●Engine fuel X1
●Fuel pump X1

 

530907


:: เข้าชม 13151 :: ข้อมูลล่าสุด 22/01/2556 ::กลับ  |  ขึ้นด้านบน  |   ส่งให้เพื่อน   
ร้านทวินโปร ฮ้อบบี้ จำหน่ายเครื่องบินบังคับวิทยุ, เฮลิคอปเตอร์บังคับวิทยุ และอุปกร์ RC ทุกชนิด   You are visitor no. 35,016,406  ออนไลน์ : 30
E-commerce Solutions by BangkokDomain.com   ®