˹á | Դ | | | ǡѺ | ԸաêԹ | Ըա觫      
            ˹á    ͧԴŢ    駡êԹ          | English    
   ǴԹ
   Ҫԡ
 : 
ʼҹ : 
 
 ѤҪԡ
 ʼҹ
   ͹ҹ
RC Thai
Bangkokdomain


ҹþҷ
ҧͿ
DJI-Innovations

 


 
Թ : LC08S35AT-FS
PowerLab 8 Touch Factory Second, 800W, Multichemistry Battery Workstation with integrated Bump Controller 
ʶҹԹ : ԹҾ
Ҥ 8,300.00   ԺС

PowerLab 8 Touch Factory Second, 800W, Multichemistry Battery Workstation with integrated Bump Controller. Factory Second units did not pass final Factory QC testing to the full 8s 40A spec; however, all units were qualified on 24VDC input at 35A into 6s LiPo. Increasing input voltage above 24VDC or increasing cell count above 6s may result in one or more ERROR CODES during operation. Beyond these limitations, these Factory Seconds meet all other published specs for the original PL8T/DPL8T models and still carry the normal 1 Year Warranty. The new PowerLab Touch series of Battery Workstations from Revolectrix combines the amazing POWER, RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION of the original Cellpro PowerLab series with integrated BUMP Technology. Countless hours of R&D has resulted in four new and amazing PowerLab models; PowerLab 6 Touch, Dual PowerLab 6 Touch, PowerLab 8 Touch, and Dual PowerLab 8 Touch. These flagship products represent the best REVO has to offer; 6s or 8s capable, Multi-Chemistry, Single or Dual Channel Charging "engines" based on time-proven reliable power circuit designs, married to a powerful, color touch LCD user interface; the best of what the original BUMP Controller has to offer, including NFC BUMPTag operation, Preset, or Manual Control of all Battery Management functions; on-screen real-time monitoring of all important data, integrated USB, and integrated Bluetooth 4LE for Android, and iOS Mobile Devices. All PowerLab Touch chargers are equipped with an EC5 connector on the input cable. Units are packaged with (6) formatted, blank BUMPTags and the USB cable for updating firmware. NOTE: The new Touch series chargers include a JST-XH connector on the charger. You may plug batteries with standard JST-XH balance connectors directly into the charger. If you are using a separate adapter, the cables used on the legacy PowerLab series chargers are not compatible with the Touch series. Click here to view the correct cable for the PL8T or DPL8T chargers. Click here to view product specifications and download Charge Control Software to your PC. Click here to view product specifications and download Charge Control Software to your PC. Click here to view the product page with accessories for the PL8T Factory Second.
















































020961

:: Ҫ 109 :: ش 2/09/2561 ::Ѻ  |  鹴ҹ  |   ͹   
ҹԹ ͺ ˹ͧԹѧѺԷ, ԤͻѧѺԷ ػ RC ءԴ   You are visitor no. 23,171,393  ͹Ź : 17
E-commerce Solutions by BangkokDomain.com   ®