Servo Hight Voltage เซอร์โวกันหางจาก Outrage สามารถต่อตรงกับแบตฯลิโพ 2 เซลล์ได้โดยตรงเลย
PRODUCT DETAILS
The Outrage Torq BL9188 tail servo is one of the most advanced servos on the market. If you are a pilot demanding the fastest in response time combined with high torque look no further. The utilization of a brushless motor ensures the ultimate in reliability with super fast response times, smooth operation and vibration resistance. The gear train is titanium coated for strength and durability. And the first two gears are helical cut for less slop and better power transfer down the gear train. All this is enclosed in a cnc machined, anodized case which offers superior stability and robustness.
The BL9188 is designed from the outset to function on 5.2 volts all the way up to 8.4 volts (unregulated 2S lithium). This allows a very light and compact installation with no regulator. The servo utilizes a center pulse width of 760 micro seconds which ensures compatibility with todays top end gyros and allows super fast response times. All of this while still recording amazing torque values of greater than 91 ozin on 8.4 volts.
Features:
- Ultra high speed and high torque tail servo
- Designed from the outset for unregulated 2S lipo compatibility
- Brushless motor and digital controller for unmatched reliability
- 760 micro second center pulse
- FULL CNC machined aluminum case
- Titanium gears
- Two helical cut gears for slop free power transfer
- Dual ball bearing output shaft
Specifications:
|
Voltage |
Speed (60 degrees) |
Torque (ozin) |
Torque (kgcm) |
|
6.0 |
0.045 |
61.77 |
4.45 |
|
7.4 |
0.037 |
76.34 |
5.5 |
|
8.4 |
0.034 |
83.28 |
6.0 |
|
Size |
1.57x0.79x1.52in |
|
Weight |
2.15oz/60.95g |
|
Output support |
Dual ball bearing |
|
Gear train |
Titanium coated |
|
Motor |
Brushless |
|
Voltage |
5.2 8.4 volts |
Package Includes:
(1) Outrage Brushless Digital Servo with Servo Horns (Futaba Splined)
NOTE: This servo is a dedicated tail servo only and will not function as a throttle servo, or when plugged directly into a receiver. Servo is designed to work at a specific pulse rate that the tail gyro sends.
For Align GP780 Users: In order to place the GP780 gyro into 760µs frame rate, the rudder stick must be moved (3) times to the right. If only moving it once, it "does" turn the light red (indicating 760µs frame rate) but as soon as you exit the setup it goes back to 1520µs frame rate. Be sure the rudder stick is moved (3) times to enter proper setup for the correct frame rate.
[540327] | 
