5.8G 500mW AV TX and RX systems for FPV is a plug-and-play wireless FPV set which is good for the one who are using 2.4Ghz radio control. Connect the AV transmitter with the camera at your kit to transfer the image to the AV receiver at the ground. Then you can see the live image immediately by connecting the AV receiver with a display. Two AV output is provided for both display and recorder.

Packing including:

• 5.8GHz 500 mW AV transmitter
• AV receiver
• AV cable x1
• Antenna for TX and RX 3db
  

Spec for video receiver:

• 8-channels selectable:

• CH1: 5705MHz
• CH2: 5685MHz
• CH3: 5665MHz
• CH4: 5645MHz
• CH5: 5885MHz
• CH6: 5905MHz
• CH7: 5925MHz
• CH8: 5945MHz

• Two AV output
• Vidio output: 1Vp-p 75Ω
• Audio output: 1Vp-p 600Ω
• Power supply: DC 12V
• Video: PAL/NTSC
• Dimension: 5.2cm x 6.8cm x 1.3cm
• Weight: 45g (without antenna), 55g (with antenna)

Spec for transmitter:

• TX Power: 500mW
• Built in microphone
• Power supply: DC 7-12V
• Dimension : 6.8cm x 2.5cm x 3cm
• Weight: 55g (without antenna), 65g (with antenna)

Back of Receiver

Front of Receiver

Top of Receiver

Transmitter

<>
O = ON
X = OFF
Chan = channel on receiver = The settings are MIRROR IMAGED to the Transmitter.

ch 1 : XXXO - 5944 = chan 8
ch 2 : OXXO - 5925 = chan 7
ch 3 : XOXO - 5904 = chan 6
ch 4 : OOXO - 5885 = chan 5
ch 5 : XXOO - 5646 = chan 4
ch 6 : OXOO - 5666 = chan 3
ch 7 : XOOO - 5686 = chan 2
ch 8 : OOOO - 5706 = chan 1

190754