Size and Weight | ||||
---|---|---|---|---|
Basic Performance | Supported Helicopter | Supported Swashplate | Supported Servo Output * | Recommended Transmitter |
Electric and fuel powered | Normal Three Servo 120° / 140° / 90° Four Servo 90° (All the types are fine tuning supported) |
500Hz (760us) / 200Hz (1520us) for Rudder Channel; Others depend on your receiver output. |
1 PCM or 2.4GHz 2 Minimum 7 channels 3 Failsafe function available on all channels | |
Recommended Power Supply | Operating Temp | Power Consumption | Built-In Memory | |
DC 4.8~8.4V (Not be exceed MAX operating voltage of servo motor) More than 4000 mAH capacity Discharge current more than 5C No separate servo power supply required |
-5°C to +70°C | MAX 5W (0.9A@5V, [email protected], [email protected], 0.4A@8V) |
4GB Flash Memory for flight information recording | |
Assistant Software System Requirement | ||||
Windows XP / Windows Vista / Windows 7 / Windows 8 | ||||
Flight Performance | Hovering Accuracy | Suitable Wind Condition | Forward / Backward Left / Right |
Acceleration Ascent / Descent |
Vertical : ± 0.5m Horizontal : ± 1m |
< 8 m/s (17.7mph) | ± 72 km/h (44.74 mph) ± 56.7 km/h (35.77 mph) |
Adjustable via ACE ONE ASSISTANT software,can be limited by user precisely | |
Hardware | Weight | Dimensions | Built-In Functions | Packaging List |
<= 150g (The devices on helicopter) | Main Controller : 61 mm x 39.6 mm x 15.8 mm IMU : 40 mm x 31 mm x 26 mm GPS & Compass : 50 mm (diameter) x 9 mm |
Autopilot / Tail Gyro / Flybar-less / Engine Speed Control / Gimbal Stabilization / Fail-safe Go-Home | Main Controller × 1 IMU × 1 GPS & Compass Module × 1 Micro USB Cable × 1 3-PIN Servo Cable × 10 Quick Start Manual × 1 |
* Recommended tail servos for Ace One:
Futaba BLS251 Brushless Digital Tail Servo FUTM0521 Torque @ 4.8V: 53 oz-in (3.8 kg-cm) Speed @ 4.8V: 0.06 sec
S9256 Heli High-Speed for GY601/GY611 Gyro 47 oz-in (3.4 kg/cm) 0.06 sec/60°
Outrage BL 9188 High Voltage Brushless Digital Tail Servo 6.0v. 0.045/sec 7.4v 0.037/sec 8.4v 0.034/sec
Outrage BL 9088 6.0v. 0.05/sec 7.4v 0.04/sec 8.4v 0.03/sec
JR DS8900G Digital Tail Servo 0.05secs/60°
JR MP80G Brushless Digital Servo 0.05secs/60°
Align DS650 0.058 sec/60° (4.8V), 0.048sec/60° (6.0V)
Notice:Flight Performance can be effected by mechanical performance and payloads
Video Tutorials
Newest Softwere
-
@Ace One Firmware* v4.022012-07-26
* Download the Firmware via Assistant software; the software only supports PC and Windows OS.
Drivers