โหลดคู่มือและซอฟแวร์ได้ ที่นี่
Product description:
For GOPRO brushless pan rack assembly TL68A08 or other similar products, used in photographic film and entertainment, advertising and many other areas of model aircraft photography.
Product Characteristics:
Support GOPRO Hero3 video output support auxiliary supply voltage polarity protection and support of the motor drive end voltage compensation circuit protection support custom support initial pitch angle sensitivity parameter adjustment and software display support 3D pose and position of the joystick mode support rate mode Receiver: Receiver General machine, S-BUS receiver, DSM2/DSMJ/DSMX receiver supports remote control device: PPM/PCM/2.4G
Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working current: 200mA-500mA (power supply voltage and the motor related)
Working temperature: -15 ℃ ~ 65 ℃
Processor: Dual-core processor ARM 32-bit high-speed sensors: three rotor MEMS gyroscopes and three MEMS accelerometers maximum rotor angular rate: 2000 ° / sec
Maximum acceleration: 16g
Control frequency: 2000Hz
Motor drive frequency: 20KHz (no noise smoothing drive)
Control accuracy: 0.1 °
Control angle range: -45 ° ~ 45 ° (roll), -135 ° ~ 90 ° (tilt)
Attitude solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm is suitable capture device: GOPRO Hero3
Product features and interfaces:
Head Master Scheduling Interface: USB to serial module connected to the computer, the main controller parameter adjustment for PTZ and status monitoring.
Motor drive parameter adjustment Interface: USB to serial module connected to the computer, is used to adjust the motor drive module motor poles and power, and voltage and current monitoring.
Receiver photos servo output interface:
R: Normal receiver roll input
T: Normal receiver input pitch
C: Normal mode receiver input (joystick angle mode or speed mode)
S: S-BUS receiver channel or camera input channels
P: photos servo output (can be connected to the infrared camera module)
+: 5V output, -: Power Ground.
Satellite interface: for connecting satellite receiver.
Roll and pitch motors motor interface: for connecting the motor.
Sensor Interface: for connection of sensors
Specifications:
ZYX3 rotor gyro USB cable group ZYX07 × 1
GOPRO two-axis gyro sensor head × 1
GOPRO two-axis gyro head master controller × 1
Φ4.5 × 4.5MM insulated pillar × 4
2 × 3MM round head Phillips screws × 8
200656
