Hardware Features:

·Supported MegaPirateNG /ArduCopterNG/ArduPlaneNG/MultiWii firmware

·8-axis motor output and 3 servos output for gimbal system

·8 input channels for standard receiver and PPM SUM input channel

·4 serial ports for debug/Bluetooth/OSD/GPS/telemetry module

·8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller

·User-defined pads D32~37 & PG1~PG5

·I2C 5V port for external device

·Output/USB ports provided over current protection

·Reverse polarity protection for input power

·Select jumper for choose internal or external magnetometer

·Onboard 16Mbit Dataflash chip for automatic datalogging

·ATMega 2560-16AU Microcontroller

·MPU6050 6-axis gyro/accel with Motion Processing Unit

·HMC5883L 3-axis digital magnetometer

·MS5611-01BA03 highprecision altimeter with metal cap

·FT232RQ USB-UART chip and Micro USB receptacle for uploading firmware and debug

·PCA9306DP1 logic level converter for I2C

·Match the standard of RoHS

Input power selection

·One of the following way

- Connect 5V power cable from ESC or UBEC to ESC/Servo port, the J1 jumper must be closed.

- Connect 5V power cable to the external power port, the J1 jumper must be removed.

Other

·Dimension: 50mmX50mmX11.6mm

·Weight: 14.5g

·Fixing hole spacing: 45mm

·Hole diameter: 3.1mm

Package content

·ALL IN ONE PRO Flight Controller x 1

·3Pin to 1Pinx3 cable 100mm x 3

·3Pin to 3Pin cable 100mm x 1

·Molex 1.25mm 4Pin cable 100mm x1

·Molex 1.25mm 6Pin cable 100mm x1

·Molex 1.25mm 8Pin cable 100mm x2