˹á | Դ | | | ǡѺ | ԸաêԹ | Ըա觫      
            ˹á    ͧԴŢ    駡êԹ          | English    
ʼҹ : 
RC Thai



Թ : TPS-E300-4
DJI E300 Tuned Propulsion System (4xmotor/ESC; 4 pair props; Accessories pack) 
ʶҹԹ : ԹҾ
Ҥ 5,900.00
ҤҾ 3,950.00   ԺС




9.4*4.3 Rotor

Representing the state of the art in this industry, the 9.4*4.3 rotor offers an approx. 20% ~ 25% improvement over the 8.0*4.5 rotor without the need of using a heavier motor, making the 350 ~ 450 model quad copter achieve a significantly higher lift and thus more powerful to carry a camera and gimbal setup (FPV). The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.

9.4*4.3  Rotor

2212 Motor

The industry leaders for multi-rotors, these motors have been used worldwide for years in a variety of scenarios with proven reliability.

From magnets to steel, from copper wire to bearing we only use the best materials to make the best products. Improved mass production techniques, along with our scientific quality control systems, lowers costs and ensures that our products are more accessible to users. Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors. Tool-free mounting and dismounting makes storage and transportation much easier.

2212 Motor


This new and improved ESC along with new highly efficient and quick response algorithms, combine to provide drastic optimization of both motor and rotor parameters, all come together to enhance this propulsion system to utilize an agile thrust which gives the aircraft extra maneuverability and stability in wind and during descending. Also feature an electromagnetic compatibility design with a coaxial-cable, which work together to provide a calm electromagnetic environment for the airborne sensors.



E300 E600
Recommended Load 300 g/axis 600 g/axis
Maximum Thrust 600 g/axis 1600 g/axis
Working Temperature -5 °C ~ 40 °C -5 °C ~ 40 °C
Units Per Package Quad or Hexa Quad or Hexa
Current 15 A OPTO 20 A OPTO
Signal Frequency 30 Hz~450 Hz 30 Hz~450 Hz
Voltage 11.1 V~14.8 V 14.8 V~25.2 V
Battery 3S~4S LiPo 4S~6S LiPo
Stator Size 22×12 mm 35×8 mm
KV 920 rpm/V 415 rpm/V
Weight 50 g 90 g
Diameter /Thread Pitch 24×11 cm 9.4×4.3 inch 33×11 cm 12×4.2 inch

:: Ҫ 10463 :: ش 3/06/2557 ::Ѻ  |  鹴ҹ  |   ͹   
ҹԹ ͺ ˹ͧԹѧѺԷ, ԤͻѧѺԷ ػ RC ءԴ   You are visitor no. 20,037,417  ͹Ź : 20
E-commerce Solutions by BangkokDomain.com   ®