ซื้อ Extend board ได้ ที่นี่ เพื่อเพิ่มฟังก์ชั่นล๊อกตำแหน่ง ทำwaypoint , Return To Home

Features:

·Supported MegaPirateNG and MultiWii firmware

·Up to 8-axis motor output

·8 input channels for standard receiver

·4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry

·2 servos output for PITCH and ROLL gimbal system

·A servos output to trigger a camera button

·6 Analog output for extend device

·A I2C port for extend sensor or device

·Separate 3.3V and 5V LDO voltage regulator

·ATMega 2560 Microcontroller

·MPU6050 6 axis gyro/accel with Motion Processing Unit

·HMC5883L 3-axis digital magnetometer

·MS5611-01BA01 highprecision altimeter

·FT232RQ USB-UART chip and Micro USB receptacle

·On board logic level converter

·Match the standard of RoHS

◆Flight mode for Multiwii

·One of the following basic mode

- Acro

- Level

- Alt Hold

- Head Lock

·Optional mode

- HeadFree (CareFree)

- GPS Hold (Need GPS receiver or Extend Board)

- GPS Back to home position (Need GPS receiver or Extend Board)

◆Flight mode for MegaPirate

·Acro

·Alt Hold

·Simple

·Loiter (uses GPS)

·Guided (uses GPS)

·Position (uses GPS)

·Circle (uses GPS)

·RTL (uses GPS)

·Auto(uses GPS)

·Follow Me(uses GPS)

◆Input power selection

·One of the following way

- Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed.

- Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed.

When using Extend Board, AIO PRO must be powered from the extend power port.

◆Other

·Dimension: 50mmX50mm

·Height: 11.6mm

·Weight: 14.2g

·Fixing hole spacing: 45mm

·Hole diameter: 3mm

◆Package content

·AIO PRO FC x 1

·3Pin to 1Pinx3 cable 100mm x 3

·3Pin to 3Pin cable 100mm x 1

·Molex 1.25mm 4Pin cable 100mm x1

·Molex 1.25mm 6Pin cable 100mm x2

·Molex 1.25mm 8Pin cable 100mm x1

080855