ก้านต่อสำหรับคุมกล้อง(ก้มเงย) CH7 ซึ่งมีมาอยู่แล้วในรีโมทของแพนทอมแต่เป็นตัวปรับอยู่ด้านในจึงต้องใช้อุปกรณ์เสริมตัวนี้เพื่อทำเป็นก้านโยกไว้ด้านหลังของรีโมทสามารถใช้นิ้วมือด้านซ้ายโยกได้สะดวก ในชุดจะมีก้านโยกให้เลือกหลายแบบ เช่น the Spoon, the Scoop, the Wheel และ the Shorty เลือกติดตั้งได้ตามใจชอบ

วีดีโอแสดงการติดตั้งและเซ็ท http://www.youtube.com/watch?v=6NAJmI-68KI

Big Lever Kit for the DJI Phantom Transmitter

This lever kit fits the stock DJI Phantom Transmitter, and includes the Steering Rod and 4 lever heads (the Wheel, the Scoop, the Spoon & the Shorty).

Please note that you need to provide your own screw, preferably 2mm x 12mm long.

DJI broke the news at this years NAB, that the stock white DJI Phantom Transmitter, has 7th channel, located on the back. This controls the X1 manual tilt/pitch control for your gimbal or camera mount. You can with this lever kit, control the tilt/pitch, and it works for brushless gimbals and servo controlled gimbals. Pick the lever head you fit your hands/grip or controls style the best.

The Shorty lever head, is approximately the same size as the ones DJI used on the transmitters on NAB. A quick search on YouTube for DJI and NAB 2013, show the gimbal and they explain the hidden 7th Channel.

The other three lever heads are upgraded levers, designed to suit different grips on the transmitter, and personal preferences on how to best operate your tilt control. They also give you a full 360° rotation, rather than just 180° other levers offer, allowing you to position it just like you want it, and use the full (270°) range of the pot.

How to install it:

See the video on how to install it. You need to open the transmitter (very easy) with the four screws on the back. Slip the steering rod inside the top bottom hole (X1). Then you put on the desired lever head, and fix with a 2mm scrw (10-15 mm length). Gently fit the steering rod into the X1 pot, and rotete it to the end point in a counterc clockwise direction. Note which way the cross in center of the pot is angels, for when you mount the lever head, so it will have a position/range that works best for you. When attaching the back lid, postion the lever head in the same position you noted earlier, and scrw together. Note, the pot is made of soft plastic, and can easily be damaged. If you want to reposition your level head, remove the back lid first, then rotate the lever and reattach it. The design of the steering rod, ensures a snug fit when transmitter is screw back together, with downward pressure of the steering rod, so the pot will be safe.

Note

Some drilling might be needed to fit the screw. I use a 2mm x 12mm scrw. also it can be wise to screw in the scrw on both rod & head individually before assembling, to tap out the holes, making it easier to assemble. Also, some use a drop of superglue to secure the lever head to the steering rod.

Brushless Gimbals

After installing the lever kit, please set the wanted adjustments in your gimbal software. There are several videos on YouTube expelling these setting for various gimbals

Servo Controlled Gimbals

After installing the lever assembly, you can set the gains for the X1 Manual, in the Naza Assistant. Default value is 100%. By lowering this value, the tilt movement is slower, and you get a smoother tilt feel.